How to choose different indoor lighting

It can be said that Indoor Lighting occupies a major position in the family. Improper selection of indoor lighting will not only affect the lighting effect, but also cause damage to people, because there are still many places to install lighting in the room, so Choose the interior lighting carefully. Next, I will introduce you to the selection of indoor lighting .

Indoor lighting selection

1. Living room

The living room lighting should be high and bright, so that the living room is bright enough. The living room lighting is best to choose a Indoor Ceiling Light or a crystal lamp. The lighting should try to keep the overall style coordinated. If the living room is large, you can use lights to solve the area division.

2. Bedroom

The bedroom lighting should create a warm atmosphere, and the shape of the main lamp should be consistent with the decoration style of the entire bedroom. If the bedside lamp and Wall Sconce, it is best to adjust the angle and brightness to facilitate reading and living in bed.

3. Restaurant

The restaurant can choose hanging lamps and use warm colored Chandelier Light to create a different dining atmosphere. In addition, you can also set up some lighting to make the whole room brighter, giving a clean and tidy feeling.

4. Kitchen

Kitchen lighting can choose ceiling lights or recessed lamps to provide sufficient light. For some special lighting places, Island Light，wall lights or track lights can be installed.

5. Toilet

The lights in the bathroom should be bright, and it is better to use incandescent lamps. The bathroom usually has a suspended ceiling, and ceiling lamps or recessed lamps can be used.

Main points of indoor lighting installation

1. The indoor lighting should be installed firmly, otherwise the safety performance will not be guaranteed when it is used in the future.

2. Indoor lighting is mainly wall lamps, table lamps, floor lamps, etc. The installation height of indoor lighting should be moderate, and the metal shell of the lighting must be grounded to ensure the safety of use.

3. Porcelain screw low base lamp heads can be used for bathroom and kitchen lighting. The wiring of the screw cap should be connected to the center contact terminal, and the neutral wire should be connected to the screw terminal.

4. For safety reasons, the handle of the switch lamp head must not have an exposed metal shell.

5. When installing the flat-top lamps, install them according to the requirements. If the lamps are larger than 3kg, you can use embedded hooks or directly fix the support hangers with expansion bolts from the roof. You cannot use the flat-top hanger bracket to install the lamps Because of its limited load-bearing capacity, if it is forcibly installed, there will be potential safety hazards in future use。