Acrylic Indoor Ceiling Light features and installation method

First, Acrylic Indoor Ceiling Light features and installation method.

Acrylic Indoor Ceiling Light belongs to a high-end product of acrylic in the lighting industry, giving full play to its transparent line, easy processing and easy dyeing characteristics to bring people unexpected visual effects.

‌

• The quality of the light source is high
  

  The light source is an important part of the lamp, the lighting is also generated by the light source, and the Lighting Fixture plays the role of decorative and auxiliary light source. The ceiling lamp made of acrylic material is very high in this regard, which improves the quality of the light source.

•  

  The material is guaranteed

  Our common lampshadesinclude acrylicshades, plastic shadesand glass shades, etc., acrylic masks are important role of them, which is characterized by softness, lightness, good light transmittance, not easy to be dyed, and will not chemically react with light and heat and turn yellow.

  The light transmittance of the lamp is very important, generally speaking, the light transmittance of the plastic mask reaches 60%, the acrylic can reach more than 90%, and the light transmittance of the acrylic surface through secondary stretching is more uniform.

•  

  Intelligent induction

  Acrylic Flush Mount has a strong induction ability, due to the use of thyristor circuits, high reliability, plus the number of induction work is almost infinite, in the same kind of products is the most electronic circuit, the quality of improvement, but also let the safety of use has been improved.

•  

  Long life

  Compared with other lamps, the light source of acrylic ceiling lamp has a longer service life, and due to the use of LED incandescent lamp, there is no mutual interference of electronic circuits, which also appropriately prolongs the service life ofLEDincandescent lamp.

  Other light sources, such as electronic energy-saving bulbs and ring lamps, are easy to blacken and cause the lamp to be scrapped due to repeated use due to the existence of mutual interference factors, and the service life is short, and it is not easy to transport.

Second, the installation method of acrylic ceiling lamp

• Determine the installation location

  Before installation, you must choose the installation location, such as the living room, dining room, and kitchen, and installLamps and Lanterns in the middle as much as possible, so that the light is uniform. To install ceiling lights, you need to choose a wall that can withstand the weight of the ceiling lamp, such as a masonry structure, or a suspended ceiling for installation, and do not choose a wooden wall, which is also for safety considerations in the later stage.

•  

  Install the base

  Place the base in the intended installation position, mark the wall with lead, remove the base, and then use an electric drill to make holes. The next step is to install the expansion bolt for fixing the base in the hole, and pay attention to the diameter and burial depth of the hole to match the bolt specifications. Then put the base back in the pre-walking position and stabilize it.

•  

  Connect the wires

  The base is fixed, start to connect the power cord and the ceiling lamp, and the two wires connected to the power cord of the ceiling lamp, the electrical contact is well maintained, and it also needs to be wrapped in tape, leaving an appropriate distance.

•  

  Install shadesand charms

  Once the wires are connected, you can turn on the power to see if the ceiling light is on, and if there is no problem, you can install theacrylic, as well as the collection of decorative hangings.

Third, precautions for installation of acrylic lamps

• When fixing the lamps, the bolts specially installed for the chandelier should be selected, so that the load and weight are just right. It is also necessary to ensure that the luminaire is robust, reliable and has a long service life.

• According to the specifications of the acrylic ceiling lamp, select the specifications of the bolts, and the size of the drilling hole and the depth of the embedded should be consistent with the bolt scale.
• There should be no less than 2 screws for stabilization, the center of the lamp and the core requirements of the screws are consistent,. And when the diameter of the insulating baseis 75mmand below, 1 bolt or screw should be used to stabilize it.
• When installing Lamps and Lanterns, it should be noted that they cannot be directly installed on combustible materials, and heat insulation or heat dissipation measures must be installed.