What tools are needed to install the Home Decorative Lighting? How to install the Lighting Product?

Generally, the installation of Lighting Fixture is handed over to professional installers to complete, and some of the Lighting Product purchased will also come with installation services. But many people are still curious and want to try to install Indoor Lighting by themselves. Then what tools are needed to install lighting? How are the Lamps and Lanterns installed? Let's explain it below.

What tools are needed to install the Home Decorative Lighting?

1. What tools are needed to install Lighting Fixture? Installation of lamps generally requires the use of electric hammers, electric drills, screwdrivers, wire pliers, tape measures, ladders, digital multimeters and so on. with these professional installation tools for Lighting Product, lamps installation can be better completed.

2. Installation of lamps and lanterns requires professional relevant construction drawings and related technical materials. Before installation, it is necessary to determine whether the roof, floor slab, and whether there is water seepage or leakage. When the lamps is installed, the installation of the lamps requires the use of embedded parts and the design requirements of the empty position, and if it does not meet the requirements, it needs to be adjusted in time.

3. What tools are needed to install lamps, the installation process, we should know that before installation. Also we should determine the installation requirements of lamps per the installation site of lamps. To determine whether the installation of lamps can meets the requirements. When inspecting lamps, you must understand the relevant documents of the lighting manufacturer and related installation technology, and check whether the appearance of the lamps is good enough, whether there are deformation, scratches, corrosion and other problems.

4. Lighting installation, we should understanding what tools are needed to install lamps, also we need to understand the lamp bulb and lamp wire installation steps. Only after understanding these can we better install the lamps. Lighting Product are also easier to install.

How to install the Home Decorative Lighting?

1. First of all, prepare the following tools: ladder, screwdriver, pencil, impact drill, diagonal pliers, tape, etc. These tools are necessary and must be prepared before installing the lamps.

2. After the tools are ready, you can start to install the lamps. But before installing the lamps, you need to remove the original lamps, and remember to cut off the lighting power in the room before dismantling.

3. After turning off the lighting power and removing the previous lamps, take out the new lamps you purchased, determine the installation position on the ceiling or wall, and use the prepared pencil to draw the hole position on the wall. It should pay attention to the installation of the lamp must be horizontal, otherwise the effect is not good after the installation is completed.

4. After the drilling position is determined, use the drill to punch the hole in the wall or ceiling, and plug the hole with rubber plug. It should be noted that when using impact drilling, you must not hit too deeply, nor should it be too shallow. A little longer than the rubber plug is preferred.

5. After the hole is punched, the next step is to thread the power cord (live wire and zero wire) on the wall or ceiling from the wire entry hole to the lamp, and then fix the lamp with the Lighting Accessories in the packing box.

6. After the Lighting Fixture is fixed, the next step is to strip the wire with pliers, and then connect the wires on the wall or ceiling with the wires on the Lighting Product, and wrap it with insulating tape or connectors. It should be noted that the alternating current has no positive or negative and can be wired arbitrarily, but it must not be short-circuited by the live wire and the neutral wire.

7. After the wires are connected, you can turn on the lighting power to see if the installed lamp can work normally or not. As long as there is no problem with the wires, the lamp can generally work normally. There is no problem with luminescence, if Lighting Product have the lampshade , then fix the lampshade. Your installation is now completed.